30Ah Series Operation

(1) Keeping POWER off, VOLTAGE REGULATOR off, CURRENT CONTROL at 0, then connect the red clip to battery red pole(+), connect the black clip to the battery black pole (-). DONOT reverse.

(2) Choosing battery charging voltage: If charging with only one battery of 12 V, turn the VOLTAGE REGULATOR to 12v (It has two gears, choose any one is ok). If charging with two batteries in series, the charging voltage should be 24 V.

(3) Plug the charger head to light, then turn on the POWER to charge.

(4) If the battery is empty, or at night charging, the CURRENT CONTROL should put for slow gear. If the battery is charged up with 50% (11.5v above), then you can turn to Mid or Fast to charge.

(5) When fully charged, the AMP meter will point to 0 (or near 0, which is on floating charge)

(1)Start charging (2)Fully charged